F&A
Landmatics
Self-opening, manually-closed, stationary, non- revolving heads are for
threading # 4 to 6-1/2", 3 to 165 mm straight and 1/8" to 4" tapered pipe threads on turret lathes, chuckers, automatics, and other similar machines.
For applications where the part rotates and the threading tool is stationary. For straight threading, large diameter, and tapered thread applications from # 4 to 6-1/2" maximum oversize (3 to 165 mm).
Self-opening, manually, or cam closed operations
available. Generally applied to turret lathes, automatics,
hand screw, and similar machines.
Manually closed, but can be optionally equipped
with an
over-travel feature allowing use with
machines having a cam or automatic closing
device.
Specifications:
F & A
Landmatics
5/8" 5DE Landmatics
Convertible, push-off, pull-off, manual or cam closed tool produces # 4 to 1-1/4" , 3 to 32 mm straight and 1/8" to 1/4" tapered pipe threads on small vertical turret screw machines.
For applications where the part rotates and the threading tool is stationary. For straight threading, large diameter, and tapered thread applications from # 4 to 1-1/4" maximum oversize (3 to 32 mm).
Push or pull- off opening, cam closed. For application to automatic turret lathes, Swiss and Brown and Sharpe machines. Feature radially adjustable shanks to allow correction for misalignment between workpiece and die head.
Cushioning spring mechanism compensates for differences between cam feed and thread lead and the correct starting pressure for the thread being cut. External trip mechanism allows for
"push-off" or "pull-off" as the application requires
Specifications:
5/8" 5DE Landmatics
Diameter
Threads
